I've just finished ripping out all the old felt/velcro tape from my pedalboards and replacing with this stuff. It is 100 times better - neater, cleaner, no fluff or dust, easier to fit, far stronger, better hold and you can use less and still get a great fit. I've not had a single pedal dislodge now (always had one or two everytime I gigged before with cheaper stuff). As this is identical double sided you can use the same tape on both the pedals and the board, so no need to keep using alternate velcros. I've just bought more of this to use on attaching lights and stuff to my rig. My drummer has even bought some to hold some stick bags on. It's expensive but you won't need to replace this for decades.

This tape is so strong that i nearly broke my DL-4 when i tried to take it off my original pedal board (When i purchased the Diago pedal board) It took me about 5 minutes to take it off. oh, and just to prove the point on how tough this stuff is. A friend of mine said that it can't be that strong, and that it will fall off if it was at a certain angle. What did i do, I'll tell you what i did, I held my board upside down and shook it for about 30 seconds. EVERYTHING WAS STILL INTACT. As if it never happened. It will make your life alot easier, and although the price might seem a bit high. I bet you won't find any other tape as strong as this. I'm even using some tape for my household items. Ha

I have just completed my pedalboard containing 11 Boss and MXR and VOX effects after several weeks of careful planning and construction. I ordered 3 metres of this tape and it is very impressive and is well worth the money though I know, to some, may seem a little expensive but this stuff grips SO good you have a hard time trying to pull your pedals off! I would recommend that you use a Loctite based adhesive inconjunction such as '495' to mate the tape to the board. Do not bother settling for the cheaper tape, this tape is the business. I am now building a second board for my GT8 and will be using this tape again.