Input Impedance: 470kOhm
Nominal Input Level: –20dBV
Output Impedance: 4.7kOhm
Nominal Output Level: –20dBV
Recommended Load Impedance: 50kOhm or Greater
Power Requirements: 9VDC (Center Pin = Negative); 40mA Minimum
Features:
• Rate—This knob controls the rate at which the phase shifting occurs. The rate control knob alternately illuminates blue and red at the same rate as the phase shifting.
• IntensiIty—This knob adjusts the intensity of the Phasing effect.
• Frequency—This knob adjusts what frequencies are affected by the phasing action. Fully counter-clockwise causes the bass frequencies to be affected most by the phasing action, fully clockwise causes the treble frequencies to be most affected by the phasing action.
• Bypass SwiItch—A “true-bypass” of the phaser effect. Turns the phasing effect on-off.
• Output Jack—Connect to the input of your amplifier (or other audio device).
• Input jack—Plug your guitar (or other audio source) in here. Un-plug the input plug from this jack to turn off the device and save power (very important) when not in use.
• DC Input Jack—Plug in a AC- 9V DC adaptor (see specifications) into this jack to eliminate the need for batteries.